How to Install Windows 7 Via Flash

How to Install Windows 7 Via Flash - Installing Windows via USB flash is apparently a lot of advantages compared to the CD or DVD disk, we do not have to worry about CDs or DVDs that guns legible same CD / DVD-ROM, CD or DVD is scratched, sometimes complicate the process of installing windows, while through the Flashdisk itself, such things need not happen again.

I will show you 2 (manually and automatically) to install Windows 7 via flash. Before we start, we need to be prepared are:

• 1 stick with 4Gb capacitance ato more, because Windows 7 at least take place at 3Gb.

How to Manual :

1. Insert the flash disc usb port.
2. Press the WIN + R, type cmd and click OK.
3. Type diskpart and press ENTER.
4. Type list disk, press ENTER and choose which one is USB flash, hati2 mistake select salah2 later that to format is another disk. If you have only one hard drive that is USB flaskdisk disk1.
5. Type select disk 1 and press ENTER.
6. Type clean and press ENTER.
7. Type create partition primary and then press ENTER.
8. Type select partition 1 and press ENTER.
9. Type active and press ENTER.
10. Type format fs = fat32 and press ENTER.
11. Type assign and press ENTER.
12. Type exit and press ENTER.
13. Insert the DVD disc windows 7 and copy all the contents of the DVD was to the USB flash disc.
14. Booting your computer through the USB stick, malalui bios settings on your computer, make sure the boot it via a USB stick, if the right steps, the installation process should be running windows via USB stick.

How to Auto:
How automatic is certainly my choice, and it is readily available to a program called WinToFlash, the program will pull through measures such as the manual method above, we need to do is run the program, select the source and the direction of windows 7 USB flash.

1. Download the latest version of WinToFlash program first.
2. Extract and run the file WinToFlash.exe
3. Click the "Check" and run the Windows setup transfer wizard.
4. Click "Next"
5. Select the file location and the location of the Windows 7 USB flash disc. click "Next".
6. Select "I Accepted the terms of the license agreement" and click "Continue"
7. Click OK to start formatting your USB stick and file windows 7 will automatically be inserted into the USB stick.
8. Click "Next" when finished pengopian and bootinglah your computer via the USB stick before. langkah2nya if true, then the process should run windows installation via USB stick.